Table of Specifications

Below are the specifications and critical dimensions for our Yo-Yo Design!

Specification	Target Numerical Value	Expected Tolerance	How to Measure
Max Diameter	2.42 in.	+/- 0.01 in.	Use calipers
String Gap	0.1 in.	+/- 0.02 in.	Use calipers
Total Mass			Use mass scale
Max Rotational Speed	4000 rpm	+/- 1500 rpm	Use strobe light tachometer and/or high speed camera
Thickness (through axel)	1.63 in.	+/- 0.04 in.	Use calipers
Diameter of Spinner (Washer inside)	0.34 in.	+/- 0.01 in.	Use calipers
Diameter of Spinner Length (end to end)	1.47 in.	+/- 0.01 in.	Use calipers
Diameter of Earth Cap Piece	0.80 in.	+/- 0.01 in.	Use calipers
Diameter of Post (attachment between Earth and Base)	0.290 in.	+/- 0.01 in.	Use calipers
Depth of Detailing on Earth Cap Piece	0.039 in.	+/- 0.01 in.	Use depth gauge
Distance between Spinner Washer and Base Shaft	0.02 in.	+/- 0.02 in.	Use calipers

*300 micron = 0.0118 in. tolerance estimated using assumptions of tolerances due to injection molding and mold fabrication